Vivo Y15CW Firmware File | MT6582 Official Stock ROM (PD1304CW)
If your Vivo Y15CW is stuck on the logo, showing a black screen, or not booting after a failed update, flashing the official stock firmware can bring it back to life. This page provides the original PD1304CW firmware, DA file, and flashing tools needed to restore your phone using the SP Flash Tool.
š§° Problems Solved with Vivo Y15CW Flash File
- Fix bootloop / stuck on logo issue
- Unbrick Vivo Y15CW dead boot
- Repair touch not working after flash
- Resolve
dm-verity verification failederror - Fix fastboot stuck and Android OS issues
⚠️ Important Before You Flash
Always confirm that your model is Vivo Y15CW PD1304CW and the chipset is MT6582. Charge the battery above 50% and backup important files before flashing to avoid data loss.
š§ How To Flash Vivo Y15CW Using SP Flash Tool
- Install MTK USB Drivers on your PC (link below).
- Extract the downloaded firmware and flash tool using 7Zip or WinRAR.
- Launch the SP Flash Tool on your computer.
- Click Scatter-loading and select the file:
MT6582_Android_scatter.txtfrom the firmware folder. - (Optional) Load DA file if your version requires authentication.
- Click the green Download button.
- Switch off the phone, press and hold the volume down button, then connect it to PC via USB cable.
- The flashing process will begin automatically.
✅ Once flashing is complete, disconnect the cable and reboot the device. It may take a few minutes to boot for the first time.
š„ Download Vivo Y15CW Firmware & Required Tools
| Component | Download Link |
|---|---|
| š Firmware File (PD1304CW_EX_B_4.2.0) | Download |
| š§° SP Flash Tool v5.1812 | Download |
| š MediaTek USB Drivers | Download |
❓ Frequently Asked Questions
- Q: Is this the official stock ROM for Vivo Y15CW?
A: Yes, it is the official firmware PD1304CW for the MT6582 variant. - Q: Will this fix my phone if it’s not turning on?
A: Yes, it works for dead boot recovery unless there's hardware damage. - Q: Do I need any special tool or box?
A: No, all you need is the SP Flash Tool, drivers, and USB cable.