All binary Latest Firmware Stock Rom Flash File of Moto Edge Plus XT2201-3 will be found on this page. By which the Moto Edge Plus XT2201-3 can be restored to the official firmware Operating System. You will find these files useful. If your Moto Edge Plus XT2201-3 software has crashed or you have installed a custom ROM in your Moto Edge Plus XT2201-3 device. And want to come again in the official stock ROM.
Note The easiest method is to install the Stock Rom Moto Edge Plus XT2201-3 to Flash with Rescue and Smart Assistant Tool.
If you Flash Moto Edge Plus XT2201-3 from the factory firmware image then after Flashing Moto Edge Plus XT2201-3 must follow the guideline.
All these files are specially for Moto Edge Plus XT2201-3. They may not be disassembled, decompiled, reverse-engineered, or distributed by modification.
|
| On this page, You can download Moto Edge Plus XT2201-3 firmware stock Rom Flash files from the firmware that helps to repair Moto Edge Plus XT2201-3 operating software, the firmware will recover. |
Updating Moto Edge Plus XT2201-3, Firmware, and Moto Edge Plus XT2201-3 Flashing Stock Rom Using RSD Flash tool
Flashing the Moto Edge Plus XT2201-3 involves using the Moto Edge Plus XT2201-3 Tool and Moto Edge Plus XT2201-3 USB Driver. Here is a general guide using the Flash Tool. But remember this guide is provided according to the software version of your Moto Edge Plus XT2201-3. And maybe the procedure for the upcoming update is different.
Prerequisites:Before installing the Moto Edge Plus XT2201-3 Tool on the computer, download the latest version from the official website.
- - Open "Settings."
- - Scroll down to "About phone."
- - Tap on "Build" three times to enable Developer Options.
- In the Developer Options, enable "Oem Unlock."
- Extract the downloaded firmware and Flash Tool files to a location on your computer.
- Connect the Moto Edge Plus XT2201-3 to the computer in Fastboot Mode with the help of the USB data cable.
- Install Moto Edge Plus XT2201-3 Flash tool and USB Drivers.
- Run the Moto Edge Plus XT2201-3 Flash tool:
- Launch Moto Edge Plus XT2201-3 RSD Flash Tool:
- select the Moto Edge Plus XT2201-3 firmware XML file, and Click on start
- Wait for the process to complete; this may take some time.
- Disconnect from the PC and reboot Moto Edge Plus XT2201-3
Flashing Steps Moto Edge Plus XT2201-3
1. Enable Moto Edge Plus XT2201-3 Developer Options:
2. Enable Moto Edge Plus XT2201-3 OEM Unlock:
3. Extract and install Moto Edge Plus XT2201-3 USB Deriver Flash Tool:
4. Flash the Factory Image:
6. Reboot Disconnect Moto Edge Plus XT2201-3:
How To Flash Moto Edge Plus XT2201-3 Firmware Install Stock Rom Dead Boot Repair
- Open the Rescue Smart Assistant RSA Tool.
- Now select Rescue.
- Select Sign in or Sign Up here, if you don't have a Lenovo account, click Sign Up to create a new account.
- After logging into the account, click on Rescue Now.
- Now the Rescue Smart Assistant RSA Tool will ask you to connect the Moto Edge Plus XT2201-3.
- Power off the Moto Edge Plus XT2201-3 and connect the Moto Edge Plus XT2201-3 to the computer by pressing the volume down button of the Moto Edge Plus XT2201-3. The Moto Edge Plus XT2201-3 will go into Fastboot Mode.
- Click on download in the tool.
Note: Make sure that the files that the tool is going to download are compatible with the Moto Edge Plus XT2201-3 model.- When the files are downloaded, click on the cross icon. When the files are completely downloaded, the Rescue Now button will be visible.
- Now click on Rescue Now.
- Now click on Proceed.
- Now the rescue and repairing process will start on the tool. And this process will go on for some time.
In case of any kind of problem, you can ask us in the comment section of our videos. Or if you have made a mistake during the Flashing and you want to recover the Moto Edge Plus XT2201-3 software, then you should search your Moto Edge Plus XT2201-3 model on this website and follow the repair method.