Download Infinix Hot 10i X659 Stock ROM | Flash Firmware for Infinix Hot 10i X659 | Infinix Hot 10i X659 Fix Software Issues
Discover how to download the Infinix Hot 10i X659 Stock ROM, flash firmware, and resolve common software problems like Infinix Hot 10i X659 dead boot, Infinix Hot 10i X659 black screen, unresponsive touch, and more. This comprehensive guide provides step-by-step instructions to flash the Infinix Hot 10i X659 using the SP Flash Tool and fix errors such as "dm verity verification failed" or being stuck in Fastboot mode.
Essential Instructions Before Flashing Infinix Hot 10i X659 Firmware:
Before starting, ensure the firmware files match your Infinix Hot 10i X659 build version. It’s critical to charge your Infinix Hot 10i X659 battery to at least 50% to prevent interruptions during the flashing process. Using incorrect firmware can lead to permanent damage, so double-check the files before proceeding.
 |
| On this page, you can download the official Infinix Hot 10i X659 firmware stock ROM flash file. This firmware is designed to repair the Infinix Hot 10i X659 operating system, recover from Infinix Hot 10i X659 dead boot issues, and fix other Infinix Hot 10i X659 software-related problems. The Infinix Hot 10i X659 is powered by a MediaTek (MTK) processor, so you’ll need to use the Mediatek Flash Tool to flash the Infinix Hot 10i X659 firmware. The Infinix Hot 10i X659 firmware files are provided in a zip package, so after downloading, extract them using tools like 7zip or WinRAR. |
Warning!
Infinix Hot 10i X659 Flashing the firmware will erase all data on your Infinix Hot 10i X659. Make sure to back up important files before proceeding. Additionally, ensure you’re using the correct build version of the firmware to avoid bricking your Infinix Hot 10i X659.
How to Flash Infinix Hot 10i X659 Using SP Flash Tool
- Download Required Files:
- Download the SP Flash Tool and the appropriate firmware for your Infinix Hot 10i X659.
- Ensure you have the correct firmware version for your Infinix Hot 10i X659.
- Install Infinix Hot 10i X659 USB Drivers:
- Install the Infinix Hot 10i X659 USB drivers on your computer to ensure proper communication between the Infinix Hot 10i X659 and the PC.
- Extract Infinix Hot 10i X659 Firmware:
- Extract the Infinix Hot 10i X659 firmware files using a tool like WinRAR or 7zip. Ensure you have the
MTK_Android_scatter.txtfile and other necessary files ready.- Open SP Flash Tool:
- Launch the SP Flash Tool by running the executable file.
- Load Infinix Hot 10i X659 Scatter File:
- Click on the Scatter Loading button in the tool.
- Browse and load the
MTK_Android_scatter.txtfile from the extracted Infinix Hot 10i X659 firmware folder.- Select Download Mode:
- In the tool, select Download Only or Firmware Upgrade mode, depending on your requirement.
- Prepare Your Infinix Hot 10i X659:
- Power off your Infinix Hot 10i X659 completely.
- If your Infinix Hot 10i X659 has a removable battery, remove it and reinsert it after a few seconds.
- Connect Infinix Hot 10i X659 to PC:
- Connect your Infinix Hot 10i X659 to the computer using a USB cable.
- Wait for the Infinix Hot 10i X659 to be detected by the tool. A red bar will appear at the bottom of the tool indicating the connection.
- Start Infinix Hot 10i X659 Flashing:
- Click on the Download button in the SP Flash Tool to begin the Infinix Hot 10i X659 flashing process.
- Wait for Completion:
- The Infinix Hot 10i X659 flashing process will take a few minutes. A green circle will appear once the process is successfully completed.
- Do not disconnect the Infinix Hot 10i X659 during this process.
- Reboot Device:
- Once the process is complete, disconnect the Infinix Hot 10i X659 and power it on. Your Infinix Hot 10i X659 should now be running the new firmware.
Note: Ensure your Infinix Hot 10i X659 has sufficient battery (at least 50%) before starting the process to avoid interruptions.